Description
Holograms after a hard cut? Fine swirls from daily driving? This ultra-delicate finishing paste clears them and leaves nothing behind but depth and gloss.
A 150 ml bottle of our finishing grade, blended on PROGRESS ABRASIVE | LOW TEMP technology and happy on any paint — hard, soft or “sticky”.
- Erases holograms after aggressive paint correction
- Removes fine swirl marks and hazing
- Preps and cleans paint before waxes or protective coatings
- Exceptional gloss and colour depth on metallic and pearl finishes
- High lubrication reduces temperature and eases machine handling
Cut: ultra delicate · Finish: deep gloss & colour depth · Best for: final finishing & hologram removal
Read the full story
Every serious correction ends with a finishing pass, and Perfect Finish V.2 is ours. The formula pairs particles with a wide abrasive range (PROGRESS ABRASIVE) with a highly lubricated paste structure (LOW TEMP), so it refines rather than fights the paint: heat stays low, the machine glides, and the risk of overheating the clear coat drops away.
Reach for it as an ultra-delicate one-step, to prepare bodywork before coatings, to strip residues for final smoothness, to undo car-wash marring, or simply to refresh newer paint. On metallic and pearl colours it uncovers the shimmer the mica particles were meant to show. It works with every paint type regardless of brand, from hard lacquers to the soft paints detailers dread.
How to use
- Shake well; work in the shade on a cool, clean surface.
- Put a few drops on a finishing pad matched to the correction required.
- Spread over roughly 40 × 40 cm and polish with moderate pressure until worked in — rotary up to 1,500 rpm, DA to preference.
- Wipe, degrease with SWAG Final Inspect and check the result; repeat if necessary.
Let hot paint cool down before the next section.
Capacity: 150 ml · Technology: PROGRESS ABRASIVE | LOW TEMP · Machines: rotary & DA · Made in Poland — in-house recipe
Reviews
There are no reviews yet.