Description
The workhorse of the SWAG POLISHING line: medium cut that clears moderate defects and still finishes glossy enough to stop at one step.
PROGRESS ABRASIVE | LOW TEMP technology combines a wide abrasive range with a high-lubrication paste that keeps the clear coat cool.
- One Step correction — cut and gloss from a single pass
- Removes swirls, moderate scratches, “sandblasting” and dull paint
- Optimal finish quality with genuinely high abrasive power
- Heat-dissipating base minimises the risk of overheating the paint
- Runs on rotary and DA machines alike
Cut: medium · Finish: high gloss · Best for: fast single-stage correction
Read the full story
When the booking sheet is full, correction time matters. One Step Polish exists to compress the polishing stage: a medium abrasive gradation with enough power to take out moderate scratches, wash-induced dullness and “sandblasting”, tuned so the same pass leaves a high-gloss finish rather than a haze that needs chasing.
Behind it sit the two technologies shared by our compounds. PROGRESS ABRASIVE blends particles across a wide abrasiveness range for a consistent, predictable cut; LOW TEMP wraps them in a highly lubricated paste that supports heat dissipation and lets the machine travel smoothly over the panel. Together they make single-stage correction quick, controlled and repeatable.
The paste wears the line’s trademark individual scent and colour, so grades are easy to tell apart at the bench.
How to use
- Shake before use; work in a shaded area on cool, clean paint.
- A few drops onto a medium pad — pick hardness and type to suit the correction.
- Work roughly 40 × 40 cm with moderate pressure until the paste is fully worked in — rotary up to 1,500 rpm, DA to preference.
- Degrease with SWAG Final Inspect, check, and repeat where needed.
Hot panel? Let it cool before the next set of passes.
Capacity: 250 ml · Technology: PROGRESS ABRASIVE | LOW TEMP · Machines: rotary & DA · Made in Poland — in-house recipe
Reviews
There are no reviews yet.